In short
A garage door that won't close from the remote is most often a sensor problem, not a broken door. In Redding, a technician checks the photo-eyes and wiring, resets the travel and force, and confirms the door reverses on contact before leaving. Don't bypass the sensors in the meantime.

Doors that won't close in Redding
Redding is wooded and hilly, and most garages here live with leaves, pollen and wildlife. In West Redding, Lonetown and Topstone, long driveways bring sand and grit to the door all winter. On Redding Ridge and around Redding Center, older farmhouses have barns and detached garages where the sensors are mounted on wood that moves with the seasons. In Poverty Hollow and Diamond Hill, low ground stays damp and connections corrode. Georgetown, the old mill village, has smaller garages close to the road. Mice chewing the low-voltage wire are behind a good share of the dead sensors we hear about in Redding.
Why a garage door refuses to close
- Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
- Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
- Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
- Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.
Quick things to rule out
- Is anything in the path of the beam, even a leaf or a cobweb?
- Are both sensor lights lit and steady?
- Does the problem only happen at one time of day? That points to sun in the sensor.
- Is the wall control's lock or vacation button switched on? It disables the remotes.
Anything beyond that, including limit and force adjustment, is a job for a technician, because a wrong setting can stop the door from reversing when it should.
What the technician does
- Checks power and wiring to both sensors and repairs any break.
- Realigns the sensors, or replaces the pair if one has failed.
- Resets the open and close travel so the door seals without straining.
- Tests the automatic reverse on an object in the doorway and with the beam blocked.
Around Redding
- Georgetown: The old mill village where Redding meets Ridgefield, Weston and Wilton, with older houses close together.
- Poverty Hollow and Diamond Hill: Quiet, heavily wooded sections with long drives and larger properties.
See the full Redding service area.